Introduction
-This is a tow outputs HDMI splitter
-It distributes the HDMI input into tow identical outputs.
-These tow outputs are synchronized.
- This has the ability of buffering and amplifying
-Series connection of the splitter achieves long distance transmission of HDMI signal of more than 15 meters
-When two or more the splitter are cascaded they can be used to create a larger distribution
-This offers solutions for HDTV retail and show site
-HDTV, STB, DVD and Projector factory, noise
-space and security concerns, data center control
-information distribution, conference room presentation
-school and corporate training environments.
Features:
-Easy to Use: Install in seconds, no need for setting
-Distribution: 2 identical HDMI outputs
-Cascaded: Large distribution achieved by cascading the splitter
-HDCP compliant.
CONNECT AND OPERATE
-Connect the HDMI input source into the splitter. (Input cables are optional)
-please refer to connection diagram section.
-Insert the DC side of 5v power supply into the splitter and then connect the
-AC side of the power supply into the wall outlet.
-Turn on the power.
SPECIFICATIONS
Operating temperature range: -5 to +35C (-41 to +95F)
Operating humidity range: 5 to 90% RH (no condensation)
Video Amplifier Bandwidth: 140 MHz
Input Video Signal: 0.5-1.0 volts p-p
Input DDC Signal: 5 volts p-p (TTL)
Maximum Single Link Range: 1280 x 1024, 1080P
Video format supported:
***VGA: 640 x 480,800 x 600,1024 x 768,1280 x 1024
***DTV/HDTV: 480i, 576i, 480p, 576p, 720p, 1080i, 1080P
Output Video: HDMI1.3+HDCP1.0 / 1.1
Power Consumption: 15 Watts (max.)
Power Supply: 5V DC
|
